Oki 390/391 - Page 102

ML390/391 Turbo Printer Handbook 95
Software I-Prime
Set unit
Set/ Reset Incremental
Print Mode
Raster Graphics
Select graphics mode
ASCII: ESC } NUL
Dec: 27 125 0
Hex: 1B 7D 00
ASCII: ESC ( U n
1
n
2
m
Dec: 27 40 85 n
1
n
2
m
Hex: 1B 28 55 n
1
n
2
m
ASCII: ESC i n
Dec: 27 105 n
Hex: 1B 69 n
ASCII: ESC ( G n
1
n
2
m
Dec: 27 40 71 n
1
n
2
m
Hex: 1B 28 47 n
1
n
2
m n
1
=1,
Epson
Function
Commands
(ASCII, Decimal, Hexadecimal)
OKI unique command. Clears data in
print buffer (receive buffer unaffected);
resets printer to menu default if applica-
ble, non-menu features returned to fac-
tory default. Executes paper eject in Cut
Sheet Feeder mode.
Sets the basic unit of horizontal and ver-
tical lengths.
n
1
=1, n
2
=0: specifies the number of pa-
rameters (in bytes) to follow
The commands affected by this com-
mand are:
ESC (V, ESC (v, ESC \, ESC $, ESC (C,
ESC (c.
Sets the Incremental print mode
n=0: Reset Incremental print mode
n=1: Set Incremental print mode
Sets the raster graphics mode.
n
2
=0: specifies the number of parame-
ters (in bytes) to follow
This command can be deactivated by
ESC @ (printer initialization). The raster
graphics command ESC is valid only
while in this mode.
The printer is initialized by this com-
mand.
Notes