Oki 390/391 - Page 87

80 Appendix C: Priner Commands
Absoulte Horizontal
Position
Relative Horizontal
Position
Set Print Position
ASCII: ESC $ n
1
n
2
Dec: 27 36 n
1
n
2
Hex: 1B 24 n
1
n
2
ASCII: ESC \ n
1
n
2
Dec: 27 92 n
1
n
2
Hex: 1B 5C n
1
n
2
ASCII: ESC DLE @ P
n
A
1
A
2
P
1
P
2
P
3
P
4
Dec: 27 16 64 [data]
Hex: 1B 10 40 [data]
Epson
Function
Commands
(ASCII, Decimal, Hexadecimal)
Move to new horizontal position.
Amount of movement from left margin
is calculated as follows:
[n
1
+ (n
2
x 256)] x (basic unit in inches),
where the basic unit is set by ESC (U, set
unit command. The default of the basic
unit is 1/60 inch.
n
1
=0 to 255
n
2
=0 to 255
n
1
=n
2
=0: left margin
Max. value: for 1/60 inch basic unit,
n
1
=48 n
2
=3(13.6" shift)
Space moved using this command will
not be underlined. DEL command will
not delete the skipped amount.
Move to new horizontal position, rela-
tive to present position. Amount of
movement is calculated as follows:
± (n
1
+ [n
2
x256] x (basic unit in inches),
where the basic unit is set by ESC (U, set
unit command. The default of the basic
unit with LQ is 1/180 inch, and with
UTL it is 1/120 inch.
n
1
=0 to 255
n
2
=0 to 255
n
1
=n
2
=0: no movement
+ moves to right; - moves to left
OKI unique command. Sets next hori-
zontal position of printhead.
Pn= number of parameter bytes to fol-
low, range 0 to 255
A
1
= specifies whether motion is abso-
lute or relative: even-absolute from
left margin; odd=relative from present
position
A
2
= specifies direction of relative
movement: even= toward right margin
(forward); odd= toward left margin (re-
verse)
0 ≤ P
1
, P
2
, P
3
, P
4
≤ 9 representing
number of units to move (size of unit
depends on character pitch)
Notes