105
CAS# 1333-86-4
OSHA TWA 3.5 mg/m3
ACGIH TLV 3.5 mg/m3
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Amorphous Fumed Silica
(less than 1% by weight)
CAS# 67762-90-7
OSHA PEL 15.0 mg/m3 for total dust
ACGIH TLV 10.0 mg/m3 for total dust
Note: This product is not regulated under Section 313 of SARA,
Title III.
Physical Data
Physical State: Solid
Melting/Freezing Point: 230°F (110°C) / Not available
Boiling Point: Not applicable
PH: Not available
Vapor Pressure: Not applicable
Vapor D ens ity (A ir= 1) : Not available
Evaporation Rate (Butyl Acetate=1): Not available
Specific Gravity (H
2
O=1): 1.15
Solubility in water: Negligible
Solubility in solvents: Not available
Coefficient of water/oil Distribution: Not available
Appearance and odor: Black granules, no odor
Odor Threshold: Not available
Fire and Explosion Hazard Data
Flammability: Not flammable under conditions of use.
Extinguishing Media: In case of fire, use extinguishing media
(water spray, CO
2
, foam, dry chemicals). When in a machine,
treat as an electrical fire.
Flash Point (ºC): Not applicable
Lower Explosive Limit: 60 g/m
3
Upper Explosive Limit: Not applicable
Auto-ignition Temperature: Not applicable
Hazardous Combustion Products: Not applicable
Explosion Data
Like most organic materials in powder form, it can form
explosive mixtures when dispersed in air.
Sensitivity to Mechanical Impact: Not available
Sensitivity to Static Discharge: Not available
To Next Page
Loading...
