Oki 56801 - Fax Machine Identification; Sender ID; Setting Fax Machine Identification

19
Connecting Telephone Line
1. Insert one end of the telephone cable into the LINE terminal
at the back of the machine.
2. Insert the other end of the telephone cable into your wall
telephone socket.
Note: An external telephone or optional external handset can be
connected to the fax machine. See the instructions below.
Installing External Handset
If you purchased an optional external handset with your fax
machine, follow these instructions to install it.
1. Insert the supplied telephone cable into the socket located on
the bottom of the cradle and feed the cable to the back of the
cradle.
2. Position the handset cradle on the left side of the fax
machine.
3. Plug one end of the handset cable into the handset. Then
plug the other end of the handset cable into the socket
located on the front of the cradle. Place the handset in the
cradle.
4. Feed the telephone cable from the back of the cradle through
the cable run located on the back of the fax machine.