28 > B411/B431 Operator Panels
Network menu: B411 Configuration Tool
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
NOTE
This is applicable to the B411dn network model.
ITEM DEFAULT REMARKS
TCP/IP ENABLE
IP VERSION IPv4
NETBEUI ENABLE
NETWARE ENABLE
ETHERTALK ENABLE
FRAMETYPE AUTO
IP ADDRESS SET AUTO
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET MASK xxx.xxx.xxx.xxx
GATEWAY ADDRESS xxx.xxx.xxx.xxx
WEB ENABLE
TELNET DISABLE
FTP DISABLE
SNMP ENABLE
NETWORK SCALE NORMAL
HUB LINK SETTING AUTO NEGOTIATE
FACTORY DEFAULTS EXECUTE
To Next Page
Loading...
