79 > B411/B431 Operation
Advanced tab
1. You can specify which times of day your printer will be
available.
2. Indicates current priority, from 1 (lowest) to 99 (highest).
Highest priority documents will print first.
3. Specifies that documents should be spooled (stored in a
special print file) before being printed. The document is
then printed in the background, allowing your application
program to become available more quickly. Options follow:
This specifies that printing should not start until the last
page has been spooled. If your application program needs
a lot of time for further computation in the middle of
printing, causing the print job to pause for more than a
short period, the printer could prematurely assume that the
document has finished. Selecting this option would prevent
that situation, but printing will be completed a little later,
as the start is delayed.
This is the opposite choice to the one above. Printing starts
as soon as possible after the document begins spooling.
4. This specifies that the document should not be spooled,
but printed directly. Your application will not normally be
ready for further use until the print job is complete. This
1
2
3
4
5
6
7
8
9
10
My Printer Properties
To Next Page
Loading...
Need help?
General
Weight and Dimensions
