How to fix INPUT JAM on Oki Printer?
If your Oki Printer is experiencing an input jam, start by removing the paper tray. Then, remove any crumpled or folded paper you find. Also, check and remove any paper from the underside of the printer. After clearing the obstructions, replace the paper tray. The printer should resume printing automatically once the damaged or misfed paper is removed.
How to fix FEED JAM or EXIT JAM on Oki B4250 Printer?
To resolve a FEED JAM or EXIT JAM on your Oki Printer, first remove the tray and clear any misfed sheets. Then, open the top cover and carefully lift out the image drum along with the toner cartridge. Remove any jammed sheets from the paper path. Re-install the image drum with the toner cartridge, and close the top cover securely. The printer will warm up and begin printing when ready. If the edge of the jammed paper protrudes, remove the jammed paper from the exit when the exit roller begins rotating after a few seconds after switching on.
Why is the print faded on my Oki Printer?
If your Oki Printer is printing faded, it could be due to a few reasons. First, ensure the toner cartridge is correctly installed. If it is, the toner might be low. In that case, replace the toner cartridge.
What to do if Oki B4250 is printing blank sheets?
If your Oki Printer is printing blank sheets, it might be due to the image drum cartridge not being properly installed. Try reinstalling the image drum cartridge. Another possible cause is an empty or missing toner cartridge, so install a new toner cartridge if needed.
Why does my Oki Printer print entire page faintly?
If the entire page prints faintly on your Oki Printer, it's likely due to an empty toner cartridge. As the toner is used up, pages will appear fainter. Install a new toner cartridge to resolve this. Alternatively, the LED array might be dirty; in this case, clean the LED array.
Why is the printed page light or blurred on my Oki Printer?
If the printed page from your Oki Printer is light or blurred, there could be several reasons. First, check if the toner is low and replace the toner cartridge if needed. Also, ensure you are using paper meant for laser printers and use the recommended paper. A dirty LED array can also cause this issue, so try cleaning the LED array.
Why are bold characters smeared on my Oki B4250 Printer?
If bold characters and dark lines are smeared on your Oki Printer's output, it's likely that the toner is low. Installing a new toner cartridge should resolve this issue.
Why is my Oki B4250 Printer printing fuzzy?
If you are experiencing fuzzy print with your Oki Printer, the LED array is likely dirty. Cleaning the LED array should resolve this issue.
Why does my Oki B4250 print garbage?
If you're getting garbage prints from your Oki Printer, the issue might be due to an incorrect cable configuration. Check the cable configuration, continuity, and length to ensure they are correct.
Why is the printing garbled on my Oki B4250 Printer?
If the printing from your Oki Printer is garbled, it indicates that the incorrect driver is installed. Install an appropriate driver to resolve this issue.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Monthly Duty Cycle | 50, 000 pages |
| Paper Capacity | 250 sheets |
| Duplex Printing | Yes |
| Connectivity | USB 2.0, Ethernet |
| Maximum Paper Size | Legal |
| Weight | 26.5 lbs (12 kg) |
To Next Page
