Oki B431L6

4. ADJUSTMENT
Oki Data CONFIDENTIAL
44983601TH Rev.1
4-27 /
4.1.5 EEPROMInitialization
ThetreatmentforEEPROMInitializationateachphenomenonisdisplayedasDiagram4-1.
Diagram4-1EEPROMInitialSettingRange
No Phenomenon
CUEEPROMArea PUEEPROMArea
Factory
Default
Area
User
Menu
Area
OP
Menu
Area
Administrator Menu/
System Maintenance
Menu Area (*3)
F/W
Revision
Area
Engine Maintenance Menu Area
Brands
Area
Drum
Counter
Page
Counter
Toner
Dot
Counter
1 UserMaintenanceMenu
EEPROM RESET
Operation
−
− − − − − − − −
2 F/WRevisioncheckerror
at the time of a power on.
−
− (*4) − − − − −
3 CUEEPROMarea
mapping
Revision check error at the
time of a power on.
(*4) − − − − − −
4 Brands area check error at
the time of a power on. (*1)
(*4) − − − −
5 Engine Maintenance Menu
ENGINERESET
Operation
− − − − − − −
(*2) (*5)
6 PUEEPROMarea
mapping check error at
the time of a power on.
− − − − − −
(*3)
7 System Maintenance
Menu
EEPROM RESET
Operation
−
(*4) − − − − − −
(*1) Destination Check is for the operation on the different product (destination) with the previously operated product
(destination).ItistheresetrelyingontherecognitionregardingthedestinationchangebyPJLcommandandthe
operationatPOWERONofthenewproductEEPROMasanerror.
(*2)Itisresetto0limitedbyPageCountlessthan500pieces.(ENGINERESETduetoPJLCommandisnotinthis
limitation.)
(*3)About DOTSHIFT setting menu,even it is also exist inSystem Maintenance Menu,but because the setting
valuekeeping area isallocated inPUEEPROMAREA, in thecase oftheitemofSystemMaintenance Menu
initialized,DOTSHIFTsettingisnotinitialized.Bycontraries,inthecaseofPUEEPROMAREAinitialized,DOT
SHIFTsettingisinitialized.
(*4)DOTSHIFTsettingshouldnotbeinitialized.
(*5)BecauseofthesupportofTonerTAG,TonerDotCounterisnotreset.