4. ADJUSTMENT
Oki Data CONFIDENTIAL
44983601TH Rev.1
4-28 /
4.2 Adjustment at part replacement
Adjustment is necessary while replacing the following part.
4.2.1 EEPROM data upload / download method
In the case of replacing the Print Board of Controller,copy the old EEPROM content to the new
EEPROMofnewboardandthensavethecustomersetting.Tooperatethis,useMaintenanceUtility.
AbouttheoperatingmethodofMaintenanceUtility,refertoMaintenanceUtilityOperatingSpecication.
MaintenanceUtilityisdesignedforworkingplaceengineeruseonly.Itisnotreleasedtotheenduser.
Referto2.4.1.1.9ofMaintenanceUtilityManual.
Replacing part Adjustment
Main PCB board EEPROM data upload / download