Oki B6500 Series - Page 17

4. Remove the new
Print Cartridge from
it’s box / packaging
and shake it 7 or 8
times as shown in
the drawing
NOTE: Do Not touch the
surface of the drum
as the OPC coating is
delicate an could be
easily damaged
5. Place the new Print
Cartridge on a flat
surface and pull the
seal out horizontally.
CAUTION:
Pulling the seal out
diagonally may
break it, rendering
the drum useless.
After the seal has
been pulled out, do
not shake or bump
the Print Cartridge
6. Hold the Print
Cartridge by the grip
and insert it into the
slot inside the
printer
NOTE: Insure that the EP
Cartridge is seated
completely inside
the printer
7. Close cover A
securely
8. Turn the power
switch on and print a
test page
Oki Data B6500Support Guide Page 13