8 - En
lish
Reproductive Toxicity:
Not classified as “Reproductive
and Development chemicals.”
Teratogenicity
: Not available.
Mutagenicity (Ames Assay):
Negative.
Name of Toxicologically Synergistic products:
Not
available.
Reactivity Data
Stability:
Stable
Condition to Avoid:
Do not expose to temperature above
200°C.
Incompatibility (Materials to Avoid):
Avoid exposure
to strong oxidizers.
Hazardous Polymerization:
Will not occur.
Condition to Avoid:
None.
Hazardous Decomposition Products:
Carbon Oxide.
Preventive Measures
Personal Protective Equipment
Respiratory Protection:
Not normally required. For large
spills (such as in bulk processing facilities), use dust
respirator during cleanup.
Protective Gloves and/or Eye Protection:
Not
normally required. For large spills (such as in bulk
processing facilities), use rubber gloves and safety goggles
during cleanup.
Engineering Controls
Ventilation:
Outside of normal ventilation, not normally
required. In bulk processing facilities, local exhaust
ventilation may be required.
Other Protective Equipment and/or Hygienic
Practices:
None
Spill Cleanup
Small Spills
Remove sources of ignition.
Sweep up or soak up with a damp (cold water) cloth.
Large Spills (such as in processing facilities)
Remove sources of ignition.
Keep unnecessary and unprotected personnel away
from area.
Wear protective gear: respirator, rubber gloves,
goggles.
After removing the bulk of the spill, wipe up
remainder with a wet (cold water) cloth. Place waste
material in a closed container.
Waste Disposal
Follow appropriate federal, state and local regulations.
Precautions
Precautions for Handling or Storage:
Do not incinerate
toner or a print cartridge. Do not disassemble a print
cartridge. Keep in a cool, dry, well-ventilated place. Keep
out of reach of children.
Other Precautions:
None
Shipping Information
Special Shipping Information:
Transport in accordance
with national and local regulations.
User’s Responsibility
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect
of your operation must be examined in regard to if, or
where, additional precautions may be necessary. All health
and safety information contained in this bulletin must be
provided to your employees or customers. It is your
responsibility to use this information to develop appropriate
work practice guidelines and employee instructional
programs for your operation.
Preparation Date of MSDS
Date:
April 15, 2010
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
www.okiprintingsolutions.com
To Next Page
Loading...
Need help?
General
Weight and Dimensions
