Oki B710n - User Manual

Other manuals for Oki B710n

Guide De L'Utilisateur144 pages

Accessory Installation Guide1 page

Guía Del Usuario149 pages

Manual Do Usuário149 pages

Accessory Guide1 page

Questions and Answers

M
Mary CortezAug 17, 2025
Why is my Oki B710n not printing?
- K
  kimberly68Aug 17, 2025
  Your Oki Printer might not be printing because the READY light is off, indicating it's off-line or in menu setting mode. Check the control panel display for an "Off-line" message and press the button. If there is another message displayed, follow the instructions to fix the problem. Also, if you're using a parallel cable, ensure your computer supports bidirectional communication; if not, disable this setting on the printer. Finally, insufficient memory can cause printing issues; try reducing the graphics setting to 600dpi or reducing the complexity of the print job.
A
Amanda MillerAug 20, 2025
How to fix Oki B710n Printer when it has no power?
- P
  Patrick RowlandAug 20, 2025
  If your Oki Printer has no power, first, make sure the printer is turned on. If it is, check the power cord to ensure it's securely connected to both the printer and the power outlet. If the problem persists, verify that the power outlet has the correct voltage for the printer, as indicated on the printer's label. If the voltage is not suitable, connect the printer to a power outlet with a suitable voltage.
P
Pamela BlackAug 22, 2025
What to do if Oki B710n has paper loading issues?
- M
  michaelmillerAug 22, 2025
  If your Oki Printer is experiencing paper loading issues such as paper jams, not feeding paper, or feeding multiple pages, ensure the paper is loaded correctly. If you are using labels, transparencies, or envelopes, fan them well before loading. Replace the paper with a new ream if the paper is damp. Also, make sure you are using the correct type of paper and that the paper tray is pushed completely into the printer. Ensure the printer is placed on a flat surface, and the paper tray guides are set correctly. If paper is fed in more than 1 sheet at a time, remove the paper in the feed tray, fan it, then load it again. Replenish paper only when all the sheets in the tray are used up.
S
Sarah RobertsAug 25, 2025
Why is printing taking so long on my Oki Printer?
- T
  Tracy WebsterAug 26, 2025
  Printing on your Oki Printer might be slow due to an insufficient receive buffer. Reduce the memory capacity of items not in use by disabling unused ports to free up memory. If the printer driver is set to [1200dpi] on the [Graphics] tab, changing the setting to [600dpi] will shorten the print time. Also, printing with TrueType fonts may increase printing time. Consider changing the printing method for TrueType fonts in [Specify Font] on the [Detailed Settings] tab of the printer driver.
R
reidtheresaAug 28, 2025
What if print job is sent, but the READY light is not on, on Oki B710n?
- P
  Phillip HodgesAug 28, 2025
  If you send a print job to your Oki Printer and the READY light doesn't turn on, the interface cable might be disconnected. Turn off the power and check the connection of the interface cable. Also, verify that the interface is configured correctly by checking the port status. Finally, ensure that your computer environment, including the printer driver, is set up correctly.
A
amanda72Aug 31, 2025
How to troubleshoot strange noise from Oki Printer?
- N
  Nancy KirbyAug 31, 2025
  If your Oki Printer is making strange noises, first ensure that the printer is placed on a stable surface. Check if cover A is open and close it securely. Also, make sure the paper tray is correctly set by pushing it completely into the printer. Finally, check for any foreign objects inside the printer. If you find any, turn off the power and remove them. If you cannot remove the object without disassembling the printer, contact service.
L
lisahowellSep 2, 2025
What does it mean when the ATTENTION light is on Oki B710n Printer?
- A
  Ashley JonesSep 2, 2025
  If the ATTENTION light is on on your Oki Printer, check the control panel for an error message and follow the instructions to resolve the error.
A
Ashley NicholsonSep 5, 2025
Why is the whole sheet printed black on my Oki Printer?
- P
  Patricia BakerSep 5, 2025
  If your Oki Printer prints a whole sheet in black, the drum/toner cartridge may be defective or damaged. Replace it with a new one. It may also be due to a breakdown of high voltage power, in which case you should contact service.
R
Ryan WilsonSep 8, 2025
Why Oki B710n prints nothing?
- R
  rroySep 8, 2025
  If your Oki Printer is printing nothing, the drum/toner cartridge is likely defective, damaged, or empty. Replace it with a new drum/toner cartridge.
K
Katherine RobertsSep 10, 2025
How to prevent envelope wrinkling with Oki B710n?
- M
  Mrs. Frances BranchSep 12, 2025
  Envelopes can wrinkle depending on the type used in your Oki Printer. To reduce wrinkling, open cover B and lift up the levers at both ends of the fuser unit. Remember to return the levers to their original positions after printing the envelope.

Summary

Basic Printer Operations

Control Panel Buttons Explained

Details the function and operation of each button on the printer's control panel.

Control Panel Display and Lights

Explains the LCD display and status indicator lights on the control panel.

Print Media Handling

Loading Standard Paper

Step-by-step guide for correctly loading standard paper into the printer tray.

Usable Media Specifications

Details supported paper types, sizes, weights, and tray capacities.

Special Media Type Printing

Information on printing with transparencies, envelopes, and labels.

Transparencies Loading and Use

Instructions and cautions for printing on transparency media.

Envelope Printing Procedures

Details supported envelope types and the correct loading procedures.

Label Loading Instructions

Information on supported label brands and how to load them into the printer.

Printer Menu Navigation and Administration

Menu Mode Overview

Explains how to navigate the printer's menu system using control panel buttons.

Configuration and System Settings

Covers Page Counts, Supplies Life, Network, and System configurations.

Tray Configuration Settings

Admin Menu Access

Admin Network and Connectivity

Admin Print and Emulation Settings

Printer Features and Operations

USB Flash Drive Printing

Storing and Retrieving Print Jobs

PDF File Printing

E-mail Printing Setup

Embedded Web Server (EWS)

Troubleshooting Printer Issues

Paper Jam Resolution

Steps to clear paper jams from different printer areas.

General Problem Diagnosis

Table of common symptoms, explanations, and actions for printer problems.

Print Quality Troubleshooting

Diagnosing and fixing poor print quality symptoms.

Error Message Reference

Alphabetical list of printer error messages and their meanings.

Network Printing Problems

E-Mail Printing Issues

Routine Maintenance and Care

Drum;Toner Cartridge Replacement

Guide for replacing the drum/toner cartridge and handling precautions.

Cleaning Printer Components

Feed Roller Cleaning Procedures

Oki B710n Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Internal memory	128 MB
Compatible memory cards	CF
Maximum internal memory	625 MB
Sound power level (standby)	30 dB
Sound pressure level (printing)	64 dB
Total input capacity	150 sheets
Total output capacity	500 sheets
Maximum input capacity	1800 sheets
Paper tray 2 input capacity	550 sheets
Envelopes sizes	C5, DL
Maximum print size	210 x 1219 mm
Paper tray media types	Banner
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Maximum duty cycle	200000 pages per month
Recommended duty cycle	15000 pages per month
Page description languages	PostScript 3, SIDM
Ethernet LAN	Yes
Network ready	-
Cabling technology	10/100Base-T(X)
Security algorithms	802.1x RADIUS, EAP, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols (IPv4)	IPv4, IPv6, ICMP, ARP, RARP, DHCP/BOOTP, DNS, HTTP, LPR/LPD
Power supply type	AC
Power requirements	230V; 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	64 - 216 g/m²
Compatible operating systems	Windows 2000/XP/Vista/7/2003/2008 Mac OS X 10.2 - 10.6
Compliance industry standards	IEEE 802.3/802.3u
Power consumption (standby)	169 W
Power consumption (printing)	1200 W
Power consumption (PowerSave)	10.3 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	15 - 80 %
Operating relative humidity (H-H)	15 - 85 %