What to do if ATTENTION light is blinking on Oki B730dn Printer?
If the ATTENTION indicator light is blinking on your Oki Printer, record the displayed error message or error code, switch off the power, pull out the power plug from the outlet, and then contact service.
Why is my Oki Printer printing nothing?
If nothing is being printed by your Oki Printer, fan the paper well and reload it. Also, replace the drum/toner cartridge with a new one.
Why is the toner smudging on prints from my Oki B730dn?
If the printed image smudges when rubbed, and the toner is not fixed on the paper, set the appropriate paper type for the paper loaded in the paper tray on the control panel. Also, try replacing the paper with paper from a new ream and loading the correct type of paper.
How to fix no power on Oki B730dn Printer?
To resolve the issue of no power in your Oki Printer: * Ensure the power switch is in the position to turn the printer on. * Try turning the printer off, disconnecting the power cord from the outlet, reconnecting it, and then turning the printer back on. * Make sure the printer is connected to a power outlet with the correct voltage and current rating.
Why is the READY light not blinking on my Oki Printer?
If the READY indicator light on your Oki Printer isn't blinking or on after sending a print job, check the following: * Turn off the printer and check the interface cable connection. * Check the port status of the interface. * Check the computer environment, including the printer driver.
How to fix light or faded print on Oki B730dn?
If the printing on your Oki printer is light, faded, or blurred, try these solutions: * Replace the paper with a new ream. * Replace the drum/toner cartridge with a new one. * Uncheck the Toner Saving checkbox on the Graphics tab of the printer driver. * Open cover B of the printer and push down the levers at both ends of the fuser unit.
Why are there spots of missing text on prints from Oki Printer?
To resolve spots of missing text on your Oki Printer, contact service. Also, replace the paper with paper from a new ream and load the correct type of paper.
Why is my Oki B730dn Printer printing at an angle?
To correct text or images that are printed at an angle by your Oki Printer, set the length guide and the right width guide in the correct positions.
Why are characters missing on prints from my Oki B730dn?
If missing characters appear throughout the length of the paper when printing with your Oki Printer, replace the drum/toner cartridge with a new one.
Why is my Oki B730dn printing all black pages?
If the whole piece of paper is printed black by your Oki Printer, replace the drum/toner cartridge with a new one.
Identifies and describes the printer's physical parts and their roles.
Details the printer's control panel buttons, indicators, and LCD screen.
Explains Print/Menu screens and how to navigate the control panel menus.
Overview of methods to modify printing settings: Control Panel, Driver, EWS.
Basic workflow for printing from Windows applications.
Step-by-step procedures for resolving paper jams in different printer areas.
Addresses common printer issues and their resolutions, including tables.
Instructions for replacing the drum/toner cartridge.
To Next Page
General
