Daily Care > 42
O
PTIONAL
ACCESSORIES
P
ART
N
UMBERS
To install the above options, follow the detailed installation sheet that accompanies the
option.
C
LEANING
THE
P
RINTER
This section describes how to clean the printer in order to maintain it in good condition and
print clean printouts all the time.
C
LEANING
THE
E
XTERIOR
Clean the exterior of the printer about once a month. Wipe the parts with a wet but well-
wrung soft cloth. Then wipe with another dry soft cloth. For stubborn stains, moisten a soft
cloth with a small amount of neutral detergent, and gently wipe the stain off.
OPTION MODEL NO. PART NO.
Offset Catch Tray JEA - 5A 01279601
Additional Paper Trays
(Tray3 and Tray4)
JEA - 7 01279501
Duplex Tray JEA - 8A 01279401
WARNING!
Be sure to switch off and unplug the machine before accessing the
interior of the machine for cleaning, maintenance, or fault
clearance. Access to a live machine’s interior can cause electric
shock.
CAUTION!
Do not spray the detergent directly on the printer. The liquid
detergent may enter the printer through a gap and cause problems.
Never use cleaning agents other than water or neutral detergent.
To Next Page
Loading...
Need help?
General
