Basic Operations > 12
S
WITCHING
O
N
AND
O
FF
THE
P
OWER
S
WITCHING
O
N
THE
P
OWER
1. Press the power switch of the printer to the <|> position.
2. When the power is switched on, various screens will be displayed on the control
panel. Check that this display changes to Ready To Print.
S
WITCHING
O
FF
THE
P
OWER
1. By checking the display on the control panel, confirm that the printer is not
processing any data. Ready To Print or Power Save must be displayed.
2. Press the power switch to the <O> position to switch the power off.
NOTE
If error message is displayed, refer to the Message List in the Reference Guide
for guidance on how to fix it.
NOTE
> Do not switch off the printer power when printing is in progress. It may
lead to a paper jam.
> Once the power is switched off, print data remaining in this printer or
information saved in the memory of this printer will be deleted.
To Next Page
Loading...
Need help?
General
