Oki B930dn Configuration Guide

29 • Discovering Devices
The Add button allows you to:
• Add an IP address of a device to the discovery database
• Create a discovery list based on IP subnet entered
• Create a discovery list based on a range of IP addresses indicated
Click the IP Address radio button and click Next.
When adding a specific IP address to the discovery database, PSV provides an option to assign the
device to a specific group of devices and associate the group to a specific SNMP community.
Enter an IP address, select a group name from the Printer Group drop down menu and type the
desired SNMP community. Click Add to save your changes.
Similar to adding a single IP Address to a database, click the IP Subnet or IP Range radio buttons
to create a discovery list for a specific IP Subnet or Range of IP addresses.
PSV also provides the option to assign a group name to the subnet or the IP address range by
selecting a pre-defined name from the group drop down menu or by clicking on the map/group
button if you would like to create a new Group name.
Enter the appropriate information and click Save.

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.