Oki B930dn - User Manual

Other manuals for Oki B930dn

Installation Instructions2 pages

Brochure & Specs4 pages

Safety Information32 pages

Questions and Answers

D
David SimpsonAug 17, 2025
Why is my Oki Printer not printing?
- J
  Jessica MackAug 17, 2025
  If the READY indicator light is off, the Oki Printer is either off-line or in menu setting mode. Press the ON LINE button to return the printer to its on-line status. Also, check for any messages displayed on the control panel or computer and follow the instructions to fix the problem. If the printer has insufficient memory, set the printer driver to 600dpi (it can be found on the Graphics tab). You can also install additional memory or reduce the complexity of the print job.
N
Nicholas AnthonyAug 20, 2025
What to do if my Oki B930dn has no power?
- M
  michaelmooreAug 20, 2025
  First, ensure that the printer is switched on by pushing the power switch to the position. Next, verify that the power cord is securely connected to both the printer and the power outlet. If it still does not work, make sure the power cord is connected to a power outlet with the correct voltage.
A
Alice SantosAug 22, 2025
Why is printing so slow on my Oki B930dn?
- D
  Douglas MeyerAug 22, 2025
  Printing can be slow if the receive buffer is insufficient. Reduce the memory capacity of items not in use, and disable any unused ports to free up memory. If the printer driver is set to 1200dpi on the Graphics tab, change it to 600dpi to shorten the print time. Also, printing with TrueType fonts can increase printing time; adjust the printing method for TrueType fonts in Specify Font on the Detailed Settings tab of the printer driver.
S
Stephanie KellyAug 25, 2025
What to do if the top section of my printed document is missing from my Oki B930dn?
- T
  Timothy ChapmanAug 26, 2025
  Make sure that the paper tray guides are set in the correct positions. Adjust the length guide and the right width guide accordingly.
T
Tony HernandezAug 27, 2025
Why is the ready light blinking on my Oki B930dn Printer, but there is no print output?
- C
  cgilbertAug 27, 2025
  There are jobs remaining in the printer. Cancel printing or force the remaining data to be printed. To forcibly print the job, press the button to set the printer in off-line mode, then press the button. After the job has been printed, press the button again to return the printer to online mode.
R
Randall GeorgeAug 30, 2025
Why is my Oki B930dn Printer printing garbage?
- N
  Nathan KiddAug 30, 2025
  The Oki Printer may be printing with non-standard built-in fonts. Check the fonts used in the application. If you are using PostScript, download the necessary fonts.
S
Sarah RobertsSep 1, 2025
What to do if my Oki B930dn Printer frequently interrupts power?
- J
  jwebbSep 2, 2025
  The printer may have malfunctioned. Turn off the power to the printer and remove the plug from the power outlet, then contact technical support. Also, ensure the power cord is securely connected to the power outlet.
J
Janice OlsenSep 4, 2025
What does it mean when the attention light is on on my Oki B930dn Printer?
- T
  Toni MillerSep 4, 2025
  Check the control panel for an error message and fix the error. A list of messages is in the Reference Guide.
E
Elaine RaySep 6, 2025
What does it mean if the attention light is blinking on my Oki B930dn Printer?
- J
  John BradySep 6, 2025
  An error has occurred that you cannot fix yourself. Record the displayed error message or error code, switch off the power, and pull out the power plug from the outlet, then contact service.
A
Amy ReidSep 9, 2025
What to do if the printout is different from what is displayed on the screen with my Oki B930dn Printer?
- D
  Donald ColeSep 9, 2025
  Change to TrueType font printing for Font Substitution on the Setup tab of the printer driver.