Oki B930dn User Manual

B930n User’s Guide> 49
The most convenient way to enable this feature is by using your
Printer Properties. You may also enable this feature at the Operator
Panel or by using the EWS.
To turn job offset on through your Printer Properties:
1. Select the Paper Feed button in the Setup tab within your
Printer Properties.
The Paper Feed Options window appears.
2. Select Job Offset.
3. Click OK.
4. Click OK.
D RIVER S ETTINGS
As you create groups of settings in your Printer Properties, you can
save that group of settings. You can then select that group of
settings by the name under which you saved them. This can save
you time and effort when printing
The most convenient way to enable this feature is by using your
Printer Properties. You may also enable this feature at the Operator
Panel or by using the EWS.
To save a group of settings in your Printer Properties:
1. Set up your print job by choosing all options in the Printer
Properties you wish to reuse.
2. Select Add in the Driver Settings area in the Setup tab within
your Printer Properties.
3. Enter a Name for the saved settings.
4. Click OK.
5. Click OK.
To use saved settings:
1. Select the desired setting_name from the Driver Settings
pulldown in the Setup tab within your Printer Properties.
2. Click OK.

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.