Oki B930dn User Manual

B930n User’s Guide> 41
5. Select Transparency as the Media Type from the Media type
pulldown.
6. Click OK.
E NVELOPES
Envelopes can be printed using Tray 5. Read the following guidelines
before printing envelopes.
• Use envelopes specifically made for laser printers.
• Make sure that envelopes are stored in a cool dry place and
in their original packaging, if possible. Heat and humidity can
cause the envelopes to seal before or during printing.
• Do not use padded envelopes
• Remove excess air from enveloped before loading into the
feeder.
• Print only on the front of the envelopes.
• Load a maximum stack height of 10mm (.4 in)
• Avoid printing over the area where the envelope seams meet.
• When using commercial flap envelopes with side seams (vs.
diagonal seams) verify that the side seams are cut all the
way to the corner of the envelope.
• Never use envelopes with windows or metal clasps; they can
damage the printer.
Loading and Printing in Tray 5
1. Insert the envelopes in the tray with the following
considerations:
• Place C4 envelopes short-edge feed in the tray.
• Place Monarch, #10, C5, and DL envelopes long-edge feed
in the tray.
• Place the side to be printed facedown.

Oki B930dn Specifications

Performance

print speed	50 pages per minute
time to first page	7 seconds
print resolution	1200 x 1200 dpi
CPU	600 MHz
duty cycle	300, 000 pages per month

Memory

standard RAM memory	256 MB
maximum RAM memory	768 MB
bitmapped fonts	47 PCL

Weight and Dimensions

dimensions	20.0" x 25.0" x 21.0" (50.8 cm x 63.5 cm x 53.3 cm)
weight	90.0 lb. (32.1 kg)
paper size	5.8" x 8.3" min. to 11" x 17" max.