Oki C332dn - PNR 12 Setup

Product Information
Setting up OKI C332dn Color Laser Printer
Fig. 2 – "Data transfer" screen
8. Scroll down and in the same menu set “Printer connection” to “USB”.
Fig. 3 – Setting Printer connection to USB
9. Press the “OK” button.
10. The printer is ready for use.
1.2 PNR 12
To install the OKI C332dn color laser printer with the PNR 12 follow these steps.
1. Unpack the printer and the cables.
2. Connect the power cable.
3. Connect the USB cable with the printer and the PNR 12.
4. Switch on the printer.
5. The printer is ready for use. There are no special settings required.
www.anton-paar.com | Created by Pütz, Dunja on 16.08.2017 | XPTIE008EN-A_ProdInfo_OKI_C332dn.docx page 2 of 3