Oki C5650 - Control Panel

19: English
Back Button
Press and hold for four seconds to
start printer shutdown.
In the Menu mode, press B
ACK to
go back to the previous Item or
Category, or to place the printer
back on line.
+ Button
Press + to enter the Menu mode or
to go to the next Category, Item or
Value in the Menu.
Press and hold this button to
advance rapidly through the
entries.
– Button
Press – to go back to the previous
Category, Item or Value in the
Menu.
Press and hold – to rapidly advance
backwards rapidly through the
entries.
Enter Button
Press E NTER to enter the Menu
mode.
Menu mode: press E
NTER to select a
Category or Item to change. Once
you have changed the setting to a
new Value, press E
NTER to engage
the Value.
On Line Button
Press O N L INE to switch the printer
between on line and off line status.
Menu mode: press O
N L INE to exit
the Menu mode and return the
printer to on line.
If there is a paper size mismatch
error, press O
N L INE to force the job
to print.
Press O
N L INE to start a manual
print job from the MP Tray once
paper has been loaded.
If there is a memory overflow,
press O
N L INE to recover and place
the printer back on line.
Cancel Button
Press and hold C ANCEL to stop
printing the current job.
Menu mode: press C
ANCEL to exit
the Menu mode and place the
printer back on line.
Ready Light (Green)
On: printer is on line.
Off: printer is off line.
Flashing: printer is receiving data.
Attention Light (Red)
On: Warning or Error status
Off: Normal status.
Flashing: Alarm status.
Control Panel