Introduction > 9
R
EAR
VIEW
This view shows the connection panel, the rear output stacker and the location of the
optional duplex (two-sided printing) unit.
* The Network Interface may have a protective “plug” which must be removed before connection can be
made.
When the rear paper stacker is folded down paper exits the printer through the rear of the
printer and is stacked here face up. This is mainly used for heavy print media. When used
in conjunction with the multi purpose feed tray, the paper path through the printer is
essentially straight. This avoids bending the paper around curves in the paper path and
enables feeding of up to 200g/m² media.
C
HANGING
THE
DISPLAY
LANGUAGE
The default language used by your printer for display messages and for report printing is
English. If required, this can be changed to:
Canadian French
South American Spanish
Brazilian Portuguese
See Optional Utilities (Change the Printer Display language utility) on the driver installation
CD.
1. ON/OFF switch.
2. AC power socket.
3. USB interface.
4. Network interface.*
5. Duplex unit (when fitted).
6. Rear, face up, 100 sheet stacker.
7. Parallel Port (B830 only).
1
2
5
6
3
4
7
To Next Page
Loading...
Need help?
General
