- 98 -
Replacing Consumables and Maintenance Units
4
4. Maintenance
4 Lift the toner cartridge (4) from the right
side, and remove it from the printer.
Possible to get
burned.
● Do not throw a used toner cartridge in the
re. They may explode, and the toner inside
may y off and cause getting burned.
Note
● When toner powder adheres to the paper feeding
area inside the printer, wipe it off with a wet cloth
that has been well wrung.
4
5 Leaving the replacement toner cartridge
in its bag, gently shake it up and down
and side to side, and then unpack it.
6 Remove the tape (5) from the toner
cartridge.
5
7 Insert a new toner cartridge (6) by
aligning its left side indentation (7) with
the protrusion (8) on the image drum so
the toner cartridge and image drum [K]
color label align. Then x the right side
rmly into place.
Note
● Do not insert a toner cartridge without removing the
tape.
6
8
7
8 Turn the blue lever (3) of the toner
cartridge backward until its top aligns on
the mark.
3
9 Close the front cover (2).
Note
● The front cover cannot be closed if the output tray is
not closed securely.
2
To Next Page
Loading...
