- 143 -
7. Maintenance
2
Press the open button (3) and open the output tray (4).
3
Remove the image drum.
4
Wipe the light-shielding film (5) with soft tissue paper.
5
Put the image drum back to the printer.
6
Close the output tray by pushing the center of the output tray firmly.
7
Close the front cover (2).
• The front cover cannot be closed if the output tray is not closed securely.
Burns may result.
The fuser unit is extremely hot. Do not touch it.
To Next Page
Loading...
Need help?
General
