Menu functions> 77
DUPLEX X
ADJUST
0.00 MM
+0.25 MM
+2.00 MM
-2.00 MM
-0.25 MM
In duplex printing, horizontally adjusts
the print position of the entire image on
the rear surface at 0.25 mm pitch.
Any image that lies outside the printable
area is not printed.
DUPLEX Y
ADJUST
0.00 MM
+0.25 MM
+2.00 MM
-2.00 MM
-0.25 MM
In duplex printing, vertically adjusts the
print position of the entire image on the
rear surface at 0.25 mm pitch.
Any image that lies outside the printable
area is not printed.
With PS, adjustment in a negative
direction is disabled.
DRUM
CLEANING
ON
OFF
Performs a cleaning action of the image
drum before printing. This can be
effective in improving the image.
NOTE:
In the factory default settings, the MEMORY MENU and SYS
ADJUST MENU are not displayed in the user menu. They will
be displayed in the user menu when the “MEMORY MENU” and
“SYS ADJUST MENU” settings are changed to [ENABLE] in the
administrator menu. For details, refer to “How to change the
settings - Administrator” on page 68.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
