Oki C910 - Page 4

When you can see the boom edge
When you can’t see the top or the boom
edge
4. Close the cover.
5. Lower the duplex lever and pull out the duplex
unit holding the lever.

A paper jam has occurred in the Duplex Unit.
1. If a Finisher unit is aached to your printer
unit, press the lever to separate the Finisher unit
from the printer.
2. Push the duplex cover release buon (1) in
the direcon of the arrow and open the cover
(2).
3. Carefully remove any jammed paper.
When you can see the top edge
