Oki C942 - Page 70

- 70 -
Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
10
Select the printer, and check that [OKI
C931(PS)] is displayed in [Print Using].
11
Click [Add].
12
Check that [C931] is displayed as added
to the printer list, and close the [Print &
Scan] screen.
Note

If [OKI C931(PS)] is not displayed correctly in
[Kind], click [-] to delete the device from [Printers],
and repeat Steps 7 to 10 again.
13
Remove the "Software DVD-ROM" from
the computer.

Using Bonjour (Rendezvous)

Installing the printer drivers on the
computer
1
Check that the device and PC are
connected, and that the power supply is
turned ON.
Reference

“Connecting Using LAN Cables” (P.57)
2
Insert the "Software DVD-ROM" into the
computer.
3
Double-click the OKI icon on the
desktop.
4
Double-click [Driver]> [Installer for OS
X10.5-10.10.pkg].
5
Enter the Mac OS X administrator
password, and click [Install software].
Finish the installation by following the
instructions displayed on the screen.
6
Select [System Preferences] from the
Apple menu.
7
Click [Print & Scan].
8
Click [+], and select [Add printer or
scanner].