14
5. Lift the top roller cover.
6. Swing open the front roller access door.
7. Dampen a soft, lint-free cloth with 90% isopropyl
alcohol, then use the cloth to wipe all three rollers
clean.
8. Use a fresh area of the cleaning cloth to wipe the
rubber pad on the front roller access door.
9. Close the front roller access door.
10. Lower the top roller cover, then lift the MP Tray
slightly and place the hinge pins on each side back
in the track.
11. Push back on the hinge latches to lock the hinges in
place.
12. Move the paper guides back to fit the print media,
then replace the media in the MP Tray.
To Next Page
Loading...
Need help?
General
