7
Fold-up Table
Tent s
(3 up per sheet)
12" x 19.125”
MP Tray 30 sheets
max
Short
Edge
Face-up Table Tents
(Ultra Heavy 2)
• Be sure to open the face-up
stacker. (See illustration
above.)
• Separate each sheet carefully
to avoid multi-sheet feeding.
• Check for paper dust and
chaff, particularly around the
cut edge of the media.
12 x 12 Corner
Clings - Triangle
die-cut adhesive
MP Tray 30 sheets
max
__ Face-up Corner Cling
(Ultra Heavy 2)
Completely fan cling film
sheets to separate before
inserting in the paper tray.
4-Up White
Low Tack Laser
Labels
8.5" x 14"
MP Tray
or
30 sheets
max
Short
Edge
Face-down White Labels
(Ultra Heavy 1)
Tray 1 Max fill to
blue line
on label
(See
illustration
on right.)
Short
Edge
Face-down White Labels
(Ultra Heavy 1)
4-Up Frosted
Low Tack Laser
Vinyl
8.5" x 14" or as
appropriate
MP Tray
or
30 Sheets
max
Short
Edge
Face-down Frosted Labels
(Ultra Heavy 1)
Tray 1 Max fill to
blue line
on label
(See
illustration
on right.)
Short
Edge
Face-down Frosted Labels
(Ultra Heavy 1)
Shelf Strip Media
strips (Matte)
8.5" x 11" or as
appropriate
MP Tray
or
30 Sheets Short
Edge
Face-up Shelf Strips
Matte
(User Type 1)
• Long edge feeding should not
be used, as multiple sheet
feeds will occur.
• Make sure to open the
printer’s face-up stacker door.
Tray 1 Max fill to
red line
on label
(see
illustration
on right.)
Short
Edge
Face-up Shelf Strips
Matte
(User Type 1)
Media Input Tray Capacity Input
Orientation
Output Bin/
Orientation
Media Type
Setting
Special Conditions/Cautions