C9600 Utilities Guide
Storage Device Manager • 186
Overlays
Windows PostScript
Defining
1. Open the file you want to print.
2. Click File → Print.
3. Right-click the appropriate printer.
4. Your action depends on your operating system.
Windows XP: Click Preferences.
Windows 2000: Click Printing Preferences.
Win Me/98, NT: Click Properties.
5. Click the Job Options tab.
6. Click Overlay.
7. Set up an Overlay Group. Click New.
The Define Overlays dialog box appears.
8. Under Group Name, enter a name for the group of overlays you
are creating.
9. To select the pages that the overlay prints on,
• In the Print on Pages drop-down list, select on which pages
the overlay is to be printed,
or
• Select Custom and enter specific page numbers under
Custom pages.
10. Under Overlay Name, type in the name of the overlay file exactly
as it was stored using Storage Device Manager (see the File List
printout), including the file extension HST.
Overlay file names are case sensitive.
11. Click Add.
12. Repeat steps 10 and 11 to add additional overlays (maximum of
three per group).
13. Click OK.
14. Click New.
To Next Page
Loading...
Need help?
General
