C9650 User’s Guide> 32
2. Fold out the paper support section and swivel out the
extension supports (2).
3. Adjust the paper guides (3) to the size of the paper being
used.
4. Fan the paper to be loaded then tap the edges of the stack on
a flat surface to make it flush.
5. Load the paper.
• For single-sided printing on letterhead, load the paper into
the multi-purpose tray with pre-printed side up and top
edge into the printer.
• For two-sided (duplex) printing on letterhead, load the
paper with pre-printed side down and top edge away from
2
3
To Next Page
Loading...
Need help?
General
