2
2-11 Installing Fiery software and fonts
Configuring the connection for Command WorkStation LE
for Mac OS X
The first time you start Command WorkStation LE, you are prompted to configure
the connection to the C9800.
BEFORE YOU BEGIN
• Print the Configuration page from the Printer Control Panel and note the IP address of
the C9800. See page 2-4.
TO CONFIGURE THE CONNECTION FOR COMMAND WORKSTATION LE
1. Start Command WorkStation LE.
The Available Servers dialog box is displayed. All servers found in the local subnet
are displayed.
NOTE: The device name for the Fiery is C9800.
To Next Page
Loading...
Need help?
General
