Oki OKILAN 510W - 41 Configuration: Printer Control Panel

41 Configuration: Printer Control Panel
C ONFIGURATION : P RINTER C ONTROL
P ANEL
To make changes in the wireless card settings using the control
panel: with
Ready to Print on the display, press ENTER to switch to
the Menu Mode.
Use the ∇, ∆ and E
NTER buttons to drill down to the Slot2 menu
and make settings as follows:
[Admin Setup] → [Password] → [Slot2: Wireless] →
• [Network Type] = Ad-Hoc or Infrastructure
• [Communication Mode] = Auto or 802.11b
• [Channel] = 1 to 13
• [SSID] = your choice
• [Authentication] = Open
• [IP Address]
•[Subnet Mask]
• [Default Gateway]