OkiLAN 8100e Configuration 39
5. When configuration is complete, select [Exit Setup] to save your
change. To exit without saving your modification, select [Quit].
6. Turn the printer off and on again.
The network card continues to use pre-transmission settings until the
printer is turned off and back on again.
12: IP Filtering Setup 1: IP Filtering
2: IP Address range 1 ~
11: IP Address range 10
1: Start Address
2: End Address
3: Printing
4: Configuration
99: Back to prior menu
12: Admin IP Address
99: Back to prior menu
97: Network Reset
——
98: Set default
(Network)
——
99: Exit setup
——
Level1 Level2 Level3
To Next Page
Loading...