Oki Pro1040 - Page 37

- 37 -
Connecting to a PC
3
Use the numeric keypad to input the
administrator password.
The factory default password is 999999.
Press the <OK> button after inputting
each character.
4
Press the <OK> button.
5
Check that [Network Setup] is selected,
and then press the <OK> button.
6
Press the scroll button
▼
several times
to select [IP Address Set], and then
press the <OK> button.
7
To set the IP address manually, press
the scroll button
▼
to select [Manual],
and then press the <OK> button.
→
Go to step 8.
When obtaining an IP address
automatically, confirm that [Auto] is
selected, and then press the <OK>
button.
→
Go to step 14.
8
Press the scroll button
▼
several times
to select [IPv4 Address], and then press
the <OK> button.