10
2 . Preparation / 2 . 1 Assemble and charge
Remove the protective film on the robot
and docking station
Placement of the charging base /
connection of power supply
* Place the docking station on an open place.
* Connect the power supply and tidy up the power
cord to avoid twining.
Turn on the robot
Reminder: Cannot charge when
product is turned off.
Charging
Place the robot at Docking Station and make sure
to align the charging electrodes
“ I ”means ON , “ O ”means OFF
A full charge takes 3 . 5 hours.
twinkling means charging.
turn off means fully charged.
To Next Page
Loading...
