10
3. Product Use / 3.4 Robot Operation
1.Start
Press the start button of Robot , Robot will build a
map based on its scan of the room, then splits
each room into squares, cleaning the edges of the
square first before covering the inside in a zigzag
pattern, finally complete cleaning of all areas.
2.Pause
When Robot is working, press the pause button of
Robot to pause the robot.
3.Partial Clean
Press partial cleaning button of Robot, Robot will clean
a 1.5m*1.5m square area centered on itself.
4.Recharge
Press recharging button of Robot, Robot will return to
Self-empty Base.
5.Sleep and wake up
Robot will sleep after full charged or without operated for 10 minutes.
When Robot is not in self-empty base and sleep for more than 4 hours, it will
automatically shutdown.
When Robot sleep, Press the start button of Robot or App to wake it up.
To Next Page
Loading...
