13
Robot will clean the Rooms selected in App.
Robot will clean the Zones drawn in App.
Specify a point on the map, and Robot will get there
automatically.
A
B
C
D
A
B
C
D
Pin n go
Zone Cleaning
Room Cleaning
Tips:
1.It’s necessary to switch on Map Save Mode in APP and save a map before
Room Cleaning.
2.Room Cleaning can only be used to customize the cleaning area and not
to isolate hazards. Please clear obstacles around the selected rooms.
Tips:
Zone cleaning can only be used to customize the cleaning area and not to
isolate hazards. Please clear obstacles around the drawn zones.
When the battery is low during the cleaning, Robot will
automatically return to Self-empty Base for charging;
After charging to 80%, it will continue cleaning from
where it left off.
Breakpoint resume
Tips:
1. The robot will not resume cleaning in Do Not Disturb mode;
2. Recharging manually or moving Robot, it will not resume cleaning.
A
B
C
D
To Next Page
Loading...
