OKP L3 - Page 24

The robot is
trapped
The robot is trapped, please remove
obstacles around the robot or move
robot to a new location to start
Error 21, please start after factory
default reset
Error 22, please put the robot in the
area to be cleaned and then start
partial cleaning
Error 23, please remove obstacles
around the robot or move robot to
a new location to start
Robot Status Light Indication APP Indication Voice Alarm
Reset factory
default
Partical cleaning
Error
RED Light On
RED Light On
RED Light On
Partial cleaning Error, please put the
robot in the area to be cleaned and
then start partial cleaning
Light
Indication
Scene White light
On
On
Breathing
On
Off
Off
Off
Red light
Off
Off
Off
Off
On
Flashing
Flashing
Not charging（Robot not stand in Self Emptying base)
Not charging（Robot stands in Self Emptying base with full power,
and it enters sleep mode）
Charging
Collecting dust
Air pressure inspection abnormal (Self Emptying base not closed
/Self Emptying base Filter blocked / Self Emptying base Air inlet
blocked / Dust outlet of Robot dust box blocked)
Collecting dust without a Dust bag
Collecting dust with a full dust bag
TOF sensor
abnormal
RED Light On
Wall Sensor Error, please
clean the wall sensor
Error 20, please clean the
along wall TOF sensors
7. Fault Elimination / 7.2 Self-empty Base
23
No Dust Box
Dust box detection Error, please
install the dust box and start
Error 24, Please install the dust box
in time and start
RED Light On
Fan Error
Fan Error, please check the fan parts
Error 25, Please check the Fan parts
in time
RED Light On
Collect Press
Error
Air Pressure Abnormal, please close
the self Empty base, or check if filter,
air inlet & dust box are blocked
Error 26, Please close the Self Empty
base, or check if filter, air inlet &
dust box are blocked
RED Light On
Collect Dust
Error
Dust Bag Abnormal, please check if
the dust bag is installed
Error 27, Please check if the dust
bag is installed
RED Light On
Dust Full
Abnormal
Dust Full Abnormal, please replace
the dust bag immediately
Please replace the dust bag
immediately
RED Light On
Dust Full
Dust Full, please clean the dust box
and start
Please clean the dust box and start
RED Light On