Oldham SV 4B - Replacing the Fuse

19
4.5. Replacing the fuse
It is mandatory that spare parts must be guaranteed original OLDHAM parts as,
otherwise, the reliability of the equipment could be adversely affected.
The fuse (Fig. 9, item 1) must be replaced by qualified personnel only.
The fuse is, and must be, in compliance with CEI 127, with time-delay, low breaking capacity
and a voltage of 250 V ~.
- Fuse 5x20- T125 mA 250 V- OLDHAM reference = 6154701
FIGURE 9
Item 1