To
Set Cruise Control
To
Resume
a
Set Speed
1.
Move the cruise control switch to
ON.
Suppose you set your cruise control at a desired speed
and then you apply the brake. This,
of
course, shuts
off
the cruise control. But you don’t need to reset it.
Once you’re going about
25
mph
(40
km/h)
or more,
you can move the cruise
control switch from
ON
to
R/A (Resume/Accelerate)
for about half a second.
You’ll go right back up to
your chosen speed and stay
there.
2.
Get up to the speed you want.
3.
4.
Push in the SET,button
at the
enid
of the lever
and release it.
Take your foot off the
accelerator pedal.
To
Increase Speed While Using Cruise Control
There
are
two ways
to
go to a higher speed. Here’s the
first:
,.
1.
Use the accelerator pedal to get to the higher speed.
2.
Push in the
SET
button, then release the.button and
.the accelerator pedal. You’ll now cruise at the higher
speed.
2-29
To Next Page
Loading...
