..
Here's ,the second way to go to a higher speed:
0
0
The accelerate feature
will
only work after you set the
the cruise controhpeed by pushing the
SET
button.
To
Reduce Speed While Using Cruise Control
There are
two
ways to reduce, your speed while using
cruise control:
0
Push
in
the SET button until you reach the lower.
Move the cruise switch from
ON
to
R/A.
Hold
it
there until
you
get up to-the speed you want, and
then release the switch.
To increase your speed in very small amounts, move
the switch to
R/A
for less than half a second and then
release it. Each time you do
this,
your vehicle will go
1
mph (.1.6
km/h)
faster.
speed you want, then release it.
0
To slow down in
very
small amounts, push the SET
button
for
less than half a second. Each time you do.
this, you'll go
1
mph (1.6 km/h) slower.
Passing
Another Vehicle While
Using
Cruise Control
Use the accelerator pedal to increase your speed. men
you take your foot
off
the pedal, your vehicle will slow
down
to the cruise control speed- you set earlier.
Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may have
to
step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. 'Of course, applying the brake
takes you out of cruise control. Many drivers
find
this to
be too much trouble and don't use cruise control on
steep hills.
To
Get Out
of
Cruise Control
There are two ways 'to
turn
off
the cruise control:
-
:x.
Step lightly on
the
brake pedal;
OR
To Next Page
Loading...
