Back-up Lamps
5.
Pull
out the taillamp assembly to reach the bulb
and
pull it out.
To
replace, push the bulb back
in.
6.
Reverse Steps
1
through
5
to replace the taillamp
filler, wing nuts and carpeting.
Rear Turn Signal
The rear
turn
signal bulb is located
on
the outboard edge
of the taillamp assembly. Follow the taillamp procedure
for replacing a turn signal bulb.
To replace
a
back-up lamp, do the following:
1.
Remove the license plate
to
expose the
bulb
cover.
6-41
To Next Page
Loading...
