5.
Twist
the
socket one-quarter of a turn
counterclockwise and pull to remove.
6.
Replace the bulb and reverse Steps
1
through
4
to
replace the assembly and tighten the bolts.
Interior
Lamps
Front and Rear Reading Lamps
To change the bulbs in the front and rear reading lamps,
do the following:
1.
Carefully insert a flat head screwdriver in the slot
between
the
lens cover and molding.
2.
Gently pry the lens cover away
to
expose the reading
lamp bulb. The lens cover should pop off.
new bulb.
3.
Remove
the
bulb from its assembly and install
a
4.
Snap the lens cover back in place.
To Next Page
Loading...
Need help?
General
