1.
Pick up the latch plate and pull the belt across you.
Don’t let
it
get twisted.
2.
Push the latch plate into the buckle until it clicks.
If
the belt stops before it reaches the buckle, tilt the
latch plate and keep pulling until you can buckle it.
Pull
up
on
the latch plate to make sure it is secure.
If the belt is not long enough, see “Safety Belt
Extender” at the end of this section. Make sure the
release button on the buckle is positioned
so
you
would be able to unbuckle the safety belt quickly
if
you ever had to.
1-26