When you sit
in
the center seating position, you have a
lap safety belt, which has no retractor.
To
make the belt
longer,
tilt
the latch plate and pull it along the belt.
To
make the belt shorter, pull its free
end
as
shown until
the belt is snug.
Buckle, position and release it the same way as the lap
part
of
a lap-shoulder belt.
If
the belt isn’t long enough,
see “Safety Belt Extender” at the end of this section.
Make sure the release button on the buckle is positioned
so
you would be able to unbuckle the safety belt quickly
if you ever had to.
1-32
To Next Page
Loading...
