1
To
replace the battery:
NOTICE:
I
1.
Insert a coin into-the notch near the keyring.
Turn
the
coin counterclockwise to separate the two halves
of
When replacing the battery, use care not to touch
any of the circuitry. Static from your body
the transmitter.
transferred
to
these surfaces may damage
the transmitter.
2.
Once
the
transmitter is separated, use a pencil
to
remove the old battery.
Do
not
use
a metal object.
3.
Replace the battery as the instructions under the
cover indicate.
4.
Snap the transmitter back together tightly to be
sure
no
moisture can enter.
5.
Resynchronize the transmitter by pressing and
holding the
LOCK
and
UNLOCK
buttons
for
eight
seconds within range
of
the
vehicle. Once the
transmitter is resynchronized, the horn will chirp and
the exterior lamps will flash once.
2-14
To Next Page
Loading...
