This light should come on, as a check to show you it is
working, when the ignition
is
on and the engine is not
running. If the light doesn’t come on, have it repaired.
This light will also come on during a malfunction in one
of two ways:
Light Flashing
--
A
misfire condition has been
detected.
A
misfire increases vehicle emissions and
may damage the emission control system on your
vehicle. Retailer or qualified service center diagnosis
and
service may be required.
0
Light On Steady
--
An
emission control system
malfunction has been detected on your vehicle.
Retailer or qualified service center diagnosis and
service may be required.
If
the Light
Is
Flashing
The following may prevent more serious damage to
your vehicle:
Reducing vehicle speed.
Avoiding hard accelerations.
Avoiding steep uphill grades.
If
you
are
towing a trailer, reduce the amount of
cargo being hauled as soon as it is possible.
2-56
To Next Page
Loading...
