To
tow your vehicle with all four wheels on the ground,
follow these steps:
m
A
1.
Position
the
vehicle to tow and then secure it.
2.
Turn
&.ignition switch to
OFF.
3.
Set the parking brake.
4.
Remove
the
following fuses from the
left
side
of
the
instrument panel fuse block A) Radio, B)
Wiper,
H)
Powertrain Control Module,
K)
Body Function
Control Module, Cluster.
This
will
prevent your battery
from
draining
while
towing.
See
“Instrument Panel Fuse
Block
-
Left”
in
Section
6
for the location
of
these fuses.
5.
Turn
the ignition switch to ACC.
6.
Shift your transaxle to
NEUTRAL
(N).
7.
Release the parking brake.
Remember to replace the fuses once you reach your
destination.
To
replace a fuse:
1.
Set the parhg brake.
2.
Remove the key from the
3.
Replace the fuse.
ignition switch.
I
NOTICE:
Make sure that the towing speed does not exceed
65
mph
(105
km/h),
or
your vehicle could be
badly damaged.
4-29
To Next Page
Loading...
Need help?
General
