10.
11.
12.
Attach the cable at least
18
inches
(45
cm) away
from the dead battery, but not near engine parts that
move. The elactrical connection
is
just as
goad
there, but the chance
of
sparks
gettmg
back to the
battery is much less.
Now start the vehicle with the good battery
and
run
the engine for a while.
Try
to start the vehicle with the dead battery.
If
it
won’t start after a few tries, it probably
needs service.
13.
Remove the cables in reverse order to prevent
electrical shorting. Take care that they don’t touch
each other
or
any other metal.
A.
Heavy Metal Engine Part
B
.
Good Battery
C.
Dead Battery
I,
5-7
I
To Next Page
Loading...
